1-phase AISI 316L immersion heater + thermostat 2000W
1-phase AISI 316L immersion heater + thermostat 2000W
159 700 1002Nexus 2 kW AISI 316L stainless steel immersion heater with thermostat, IP44 protection, ~230 V supply voltage and 1 1/2 inch brass screw plug for storage tanks.
- Nexus® Brand:
- Sanitair water / RVS 316L Category:
- Stock:
Cost overview
-
€ 199,00Article
1-phase AISI 316L immersion heater + thermostat 2000W
Nexus 2 kW AISI 316L stainless steel immersion heater with thermostat
The Nexus 2 kW AISI 316L stainless steel immersion heater with thermostat is an electric screw-in immersion heater for boilers, buffer tanks and storage vessels with a suitable 1 1/2 inch connection.
With 1-phase connection, ~230 V supply voltage and integrated thermostat, the element can be used as electric backup heating, emergency heating or additional support for a storage tank.
The heating element is made from AISI 316L stainless steel; the screw plug is made from brass. IP44 protection, safety temperature limiter and CE approval support professional installation.
Electrical connection must be carried out by a qualified installer. For reliable operation, the immersion heater must be correctly installed and fully surrounded by water during operation.
Key Features
- 2000 W output
- 1-phase immersion heater with thermostat
- Heating element made from AISI 316L stainless steel
- 1 1/2 inch brass screw plug
- IP44 protection type
- With safety temperature limiter
Specifications
Technical data - Nexus 2 kW AISI 316L stainless steel immersion heater with thermostat
| General | |
| Product type | 1-phase stainless steel immersion heater with thermostat |
| Output [W] | 2000 |
| Phase | 1-phase |
| Voltage | ~230 V |
| Insulation material | MgO |
| Protection class | I |
| Tube diameter [mm] | 8.1 |
| Specific surface load [W/cm2] | 8.19 |
| Heating element material | AISI 316L stainless steel |
| Thread / plug material | 1 1/2" brass |
| Protection type | IP44 |
| Temperature control | Thermostat 0-72 deg C +/- 5 deg C |
| Safety temperature limiter | 85 deg C +/- 0.5 deg C |
| Electrical connection | PVC cable 3 x 1.5 mm2, L=1500 mm |
| Approvals | CE |
| Dimensions | |
| A dimension [mm] | 310 |
| B dimension [mm] | 254 |
| C dimension [mm] | 80 |
| Installation notice |
| Electrical connection and installation must be carried out by a qualified professional. The immersion heater must be installed only in a suitable storage tank connection and must remain fully immersed during operation. |