Nexus Stainless Steel DHW Cylinder InLine 300XL-LE1 32 mm Black
Nexus Stainless Steel DHW Cylinder InLine 300XL-LE1 32 mm Black
236 200 1002236 200 1002 300 L stainless steel DHW cylinder with XL 316L heat exchanger, black finish and all connections in one vertical line.
- Nexus™ InLine series Brand:
- RVS Inline Series Category:
- Stock:
Cost overview
-
€ 1.652,65Article
300 L Stainless Steel DHW Cylinder for Higher Hot Water Demand
The 300XL-LE1 adds extra storage volume for residential and light commercial projects with a higher domestic hot water requirement. Its InLine connection side keeps pipe routing clear and installation easier to organize.
30 m Corrugated AISI 316L Heat Exchanger
The longer XL heat exchanger supports efficient heat transfer from the heat pump to the domestic water. This makes the model a good fit where comfort, recovery performance and system efficiency all matter.
Professional Black Finish
The stainless steel inner tank, insulated casing and black outer shell give the unit a durable, clean appearance for modern plant rooms and HVAC installations.
Specifications
Technical specifications - PAWT 300 XL-LE1 32mm
| General | |
| Product type | Stainless steel heat pump cylinder / hot water storage tank |
| Rated volume | 300 L |
| Actual volume | 281 L |
| Application | Heat pump / domestic hot water |
| Installation type | Vertical floor-standing |
| Connection layout | All connections in one vertical line |
| Number of exchangers | 1 |
| Height [mm] | 1560 |
| Tilt dimension [mm] | 1671 |
| Outer diameter [mm] | 600 |
| Inner diameter [mm] | 500 |
| Insulation | CFC-free rigid PU foam |
| Insulation thickness [mm] | 50 |
| Outer casing | Frosted metal, Black |
| Weight [kg] | 55 |
| Warranty | 5 years |
| Tank | |
| Tank material | Stainless steel Duplex 2205 |
| Max. operating / test pressure | 6/10 bar |
| Max. tank temperature [°C] | 95 |
| Heat exchanger | |
| Exchanger type | XL heat pump corrugated coil heat exchanger |
| Exchanger design | Corrugated pipe coil |
| Exchanger diameter [mm] | 32 mm |
| Exchanger material | AISI 316L stainless steel |
| Exchanger length [m] | 30 |
| Exchanger surface area [m²] | 4.5 |
| Exchanger volume [L] | 19 |
| Max. exchanger pressure [bar] | 10 |
| Max. exchanger temperature [°C] | 95 |
| Connections | ||||
| H | DN 14 | G 3/4" | P&T safety valve | 1560 mm |
| D | DN 3 | G 1" | Ø32 mm AISI 316L XL heat exchanger 30 m, inlet / outlet | 1235 mm |
| A | DN 4 | G 1" | Ø32 mm AISI 316L XL heat exchanger 30 m, outlet / inlet | 330 mm |
| C | DN 5 | G 3/4" | Sensor pocket 1 (12.7 mm) | 1035 mm |
| L | DN 6 | G 1½" | Electric heating element | 280 mm |
| I | DN 7 | G 3/4" | Sensor pocket 2 (12.7 mm) | 430 mm |
| E | DN 8 | G 1" | Connection (inlet / outlet) | 230 mm |
| F | DN 9 | G 1" | Connection (inlet / outlet) | 1335 mm |
| G | DN 16 | G 1/2" | Drain port | 33 mm |
| Safety requirements |
| The storage vessel must be protected against overpressure at all times. We recommend installing the following safety accessories: * Safety valve and inlet combination * Nexus sanitary expansion vessel * Nexus expansion vessel for heating systems The required expansion vessel capacity must be calculated according to the total system volume and operating conditions. |