RVS Hygiëne boiler NXWT 200H 100L buffer
RVS Hygiëne boiler NXWT 200H 100L buffer
229 200 1010Duplex 2205 stainless steel combination tank with DHW storage and buffer volume for heat pump and central heating systems.
- Nexus™ Black-series Brand:
- RVS Black Series Category:
- Stock:
Cost overview
-
€ 1.805,10Article
RVS Hygiëne boiler NXWT 200H 100L buffer
RVS Hygiëne boiler NXWT 200H 100L buffer: Stainless Steel Combination Tank for Heat Pumps
The RVS Hygiëne boiler NXWT 200H 100L buffer combines domestic hot water storage with additional buffer volume for heat pump systems and professional HVAC installations. It is designed for applications where hot water comfort and hydraulic stability are needed in one compact solution.
Duplex 2205 Stainless Steel and Integrated Heat Exchanger
The inner tank is manufactured from Duplex 2205 stainless steel. The integrated AISI 316L corrugated stainless steel heat exchanger supports efficient heat transfer from the heat pump to the domestic hot water section.
Energy Efficiency Class A
With Energy Efficiency Class A, the high-quality PU insulation helps reduce heat loss, keeps stored water warmer for longer and supports lower energy consumption in heat pump systems. This makes the Nexus stainless steel boiler range an efficient choice for reliable hot water storage and long-term energy savings.
Compact Installation and System Stability
The buffer section increases system volume and helps the heat pump operate more smoothly, while the DHW section provides reliable domestic hot water storage.
Key Features
- Energy Efficiency Class A
- Manufactured from Duplex 2205 stainless steel
- High-quality PU insulation to help reduce heat loss
- Designed for installers, resellers and HVAC professionals
- Combines domestic hot water storage with additional buffer volume
- AISI 316L corrugated stainless steel heat exchanger
- Compact solution for heat pump systems
Specifications
Technical data — PDWT horizontal black 200 L heat pump storage tank + 100 L buffer tank, Energy Label A
| General | |
| Product type | Heat pump storage tank + buffer tank |
| Rated volume | 200+100 L |
| Application | Heat pump / domestic hot water and buffer storage |
| Installation type | Horizontal floor-standing |
| Connection layout | Combined connections for cylinder and buffer tank |
| Number of exchangers | 1 |
| Width [mm] | 1849 |
| Tilt dimension [mm] | 1944 |
| Outer diameter [mm] | 600 |
| Inner diameter [mm] | 500 |
| Insulation | CFC-free rigid PU foam |
| Insulation thickness [mm] | 50 |
| Outer casing | Frosted metal, Black |
| Weight [kg] | 70 |
| Warranty | 5 years |
| Tank | |
| Tank material | Stainless steel Duplex 2205 |
| Max. tank pressure [bar] | 10 |
| Max. tank temperature [°C] | 95 |
| Heat Exchanger | |
| Exchanger type | Heat pump corrugated coil heat exchanger |
| Exchanger design | Corrugated pipe coil |
| Exchanger material | AISI 316L stainless steel |
| Exchanger length [m] | 25 m |
| Exchanger surface area [m²] | 3.25 |
| Max. exchanger pressure [bar] | 10 |
| Max. exchanger temperature [°C] | 95 |
| Connections | ||||
| H | DN 13 / DN 14 | G 3/4" f | P&T safety valve | 600 |
| M | DN 14 | G 3/4" f | P&T safety valve | 1178 |
| Q | DN 13 | G 3/4" f | P&T safety valve | 289 |
| K | DN 9 / DN 29 | G 1½" m | Hot water inlet/outlet | 460 |
| F | DN 3 / DN 23 | G 1½" m | 28 mm AISI 316L heat exchanger 25 m, inlet/outlet | 360 |
| E | DN 4 / DN 24 | G 1½" m | 28 mm AISI 316L heat exchanger 25 m, inlet/outlet | 300 |
| G | DN 8 / DN 28 | G 1½" m | Cold water inlet/outlet | 200 |
| I | DN 6 | G 1½" f | Electric heating element | 762 |
| Q | DN 25 | G 1/2" f | Sensor pocket | 289 |
| L | DN 5 | G 1/2" f | Sensor pocket 1 | 1524 |
| L | DN 7 | G 1/2" f | Sensor pocket 2 | 1524 |
| Q | DN 15 | G 1/2" f | Drain tap | 289 |
| M | DN 16 | G 1/2" f | Drain tap | 1178 |
| Safety requirements |
| The storage vessel must be protected against overpressure at all times. We recommend installing the following safety accessories: • Safety valve and inlet combination • Nexus sanitary expansion vessel • Nexus expansion vessel for heating systems The required expansion vessel capacity must be calculated according to the total system volume and operating conditions. |